BORDEN INC., KRYLON DEPT. -- KRYLON 2411 BRICK  -- 8010-00N008326
<pre>=====================  Product Identification  =====================

Product ID:KRYLON 2411 BRICK
MSDS Date:01/01/1987
FSC:8010
NIIN:00N008326
=== Responsible Party ===
Company Name:BORDEN INC., KRYLON DEPT.
Address:180 E BROAD ST
City:COLUMBUS
State:OH
ZIP:43215-3705
Country:US
CAGE:EO688
=== Contractor Identification ===
Company Name:BORDEN CHEMICAL CO
Address:180 E BROAD ST
Box:City:COLUMBUS
State:OH
ZIP:43215-3705
Country:US
Phone:614-225-6124
CAGE:86142
Company Name:BORDEN INC., KRYLON DEPT
Address:FORD & WASHINGTON ST
City:NORRISTOWN
State:PA
ZIP:19404
Country:US
Phone:(215) 278-2456
CAGE:EO688

=============  Composition/Information on Ingredients  =============

Ingred Name:N-BUTYL ALCOHOL  (SARA III)
CAS:71-36-3
RTECS #:EO1400000
OSHA PEL:100 PPM
ACGIH TLV:S, C 50 PPM; 9293
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS

Ingred Name:METHYL ETHYL KETONE (2-BUTANONE) (MEK)  (SARA III)
CAS:78-93-3
RTECS #:EL6475000
Fraction by Wt: 8-17%
OSHA PEL:200 PPM/300 STEL
ACGIH TLV:200 PPM/300STEL 9192
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS

Ingred Name:XYLENES (O-,M-,P- ISOMERS)	(SARA III)
CAS:1330-20-7
RTECS #:ZE2100000
Fraction by Wt: 6-14%
OSHA PEL:100 PPM/150 STEL
ACGIH TLV:100 PPM/150STEL;9192
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS

Ingred Name:TOLUENE  (SARA III)
CAS:108-88-3
RTECS #:XS5250000
Fraction by Wt: 2-3%
OSHA PEL:200 PPM/150 STEL
ACGIH TLV:50 PPM; 9293
EPA Rpt Qty:1000 LBS
DOT Rpt Qty:1000 LBS

Ingred Name:ACETONE  (SARA III)
CAS:67-64-1
RTECS #:AL3150000
Fraction by Wt: 36.5%
OSHA PEL:1000PPM
ACGIH TLV:750PPM/1000STEL;9293
EPA Rpt Qty:5000 LBS
DOT Rpt Qty:5000 LBS

=====================  Hazards Identification  =====================

Effects of Overexposure:INH:MAY BE HARMFUL;LIQ/VAP MAY IRRIT
    NOSE,THROAT,LUNGS. SKIN/EYES:IRRIT. INGEST:MAY BE HARMFUL

=======================  First Aid Measures  =======================

First Aid:INGEST:DO NOT INDUCE VOMITING;CALL PHYSICIAN IMMED. SKIN
    IMMED FLUSH W/WATER FOR AT LEAST 15 MIN;IF IRRIT PERSISTS,CALL A
    PHYSICIAN. EYES:IMMED FLUSH W/WATER 15 MIN W/EYELIDS APART;CALL
    MD.INH:REMOVE  T FRESH AIR;GIVE ARTIF RESP OR O*2 IF NEC;CALL MD.

=====================  Fire Fighting Measures  =====================

Flash Point:N/A AEROSOL
Extinguishing Media:DRY CHEMICAL,CO*2,FOAM. WATER MAY BE INEFFECTIVE
Fire Fighting Procedures:USE WATER TO COOL FIRE EXPOS CANS. WEAR SCBA
Unusual Fire/Explosion Hazard:EXTREM FLAM;UNDER PRESSURE. HI TEMP MAY
    BURST CANS;AVOID ALL HEAT/IGNIT SOURCES,DIRECT SUN.

==================  Accidental Release Measures  ==================

Spill Release Procedures:ELIMINATE ALL IGNITION SOURCES. SOAK UP
    W/ABSORBENT MATERIAL & REMOVE TO A CHEMICAL DISPOSAL AREA. PREVENT
    ENTRY INTO NATURAL BODIES OF WATER.

======================	Handling and Storage  ======================

Handling and Storage Precautions:DO NOT STORE AT TEMPERATURES OVER
    120F. WASH THOROUGHLY AFTER HANDLING. AVOID PRPOLONGED OR REPEATED
    CONTACT W/EYES,SKIN OR CLOTHING.
Other Precautions:USE W/ADEQUATE VENTILATION. AVOID BREATHING VAPOR OR
    MIST. HANDLING IAW GOOD INDUSTRIAL HYGEINE & SAFETY.

=============  Exposure Controls/Personal Protection  =============

Respiratory Protection:NIOSH/MSHA APPRVD RESP PROT DEPENDING ON
    CONDITIONS OFUSE/TLV EXPOS
Ventilation:LOCAL EXHAUST IN VOLUME & PATTERN ADEQ TO KEEP BELOW TLV
Protective Gloves:IMPERVIOUS
Eye Protection:GOGGLES IF CONTACT LIKELY
Supplemental Safety and Health
DATE OF PREP:06/30/86. ADD INGRED: METHYL ISOBUTYL KETONE, 2-4%
    2-PROPANOL 1-METHOXY-,ACETATE,7-8%; PROPANE,16-17%.

==================  Physical/Chemical Properties  ==================

Vapor Density:>1.0
Spec Gravity:<WATER
Evaporation Rate &amp; Reference:FASTER THAN BU AC
Solubility in Water:SLIGHT
Appearance and Odor:N/A, PRESSURIZED CAN - PSIG APPROX 60 AT 70F

=================  Stability and Reactivity Data  =================

Stability Indicator/Materials to Avoid:YES
Hazardous Decomposition Products:CO,CO*2

====================  Disposal Considerations  ====================

Waste Disposal Methods:DISPOSE OF ACCORDING TO LOCAL,STATE & FEDERAL
    REQUIREMENTS. EMPTY CONTAINER: MAY CONTAIN EXPLOSIVE VAPORS. DO NOT
    CUT,PUNCTURE OR WELD ON OR NEARBY. INCINERATION WILL CAUSE
    CONTAINER TO BURST VIOLENTL Y.

 Disclaimer (provided with this information by the compiling agencies):
 This information is formulated for use by elements of the Department
 of Defense.  The United States of America in no manner whatsoever,
 expressly or implied, warrants this information to be accurate and
 disclaims all liability for its use.  Any person utilizing this
 document should seek competent professional advice to verify and
 assume responsibility for the suitability of this information to their
 particular situation.